Since its introduction to the United States in 2011, EMV chip technology has dramatically:
EMV technology has also allowed customers to use their cards abroad with greater convenience and confidence.
What are EMV credit cards, and how do they protect businesses and consumers from payment fraud?
Short for “Europay, Mastercard, and Visa,” EMV credit cards come with embedded “smart chips” that offer much greater protection against fraud than their traditional magnetic stripe counterparts.
The embedded security chips that come with EMV technology are very difficult to clone. To successfully complete an in-store transaction at an EMV-enabled card terminal, the original version of the card (and chip) must be physically present.
Most of the world had already graduated to EMV chip technology by the time it arrived stateside in 2011. Yet, to speed the transition to this more secure payment standard, the U.S. introduced new liability rules in October 2015. Merchants and card-issuing banks that didn’t make the switch to EMV technology would be responsible for any losses resulting from fraudulent activity. They would also be subject to punitive fines.
As of 2019, more than one billion chip cards have been issued to U.S. consumers.1
EMV chip technology can store far more information than magnetic stripe credit cards. This technology allows these credit cards to hold encrypted data, which helps protect against in-store payment fraud. Better still, this encrypted data is dynamic, meaning the information can change over time.
Whenever EMV chip technology is used for an in-store payment:
These transaction codes prevent EMV credit cards from being compromised. Even if they fall into the wrong hands, fraudulent cards are unable to generate the proper codes.
Because the rest of the world has already adopted EMV chip technology, Americans who still rely on legacy plastic often face difficulties when they shop abroad. However, using EMV cards helps to remove restrictions when buying in-person from merchants around the globe.
Many stateside businesses continue to move to the more secure EMV chip standard. As of 2019, over 3.7 million merchants now accept chip cards.2
Although liability rules might be the driving force behind widespread EMV adoption, the transition is greatly aided by EMV chip technology’s enhanced security, greater speed, and unmatched convenience. Chip-enabled plastic is also the default payment standard for in-person transactions around the globe. This means that terminal manufacturers, card-issuing banks, merchants, and customers who haven’t already made the switch risk being cut out of the “sales” process.
Getting started with EMV technology is a lot easier than most people realize.
As a consumer, all you need is a credit card embedded with an EMV security chip. Because most card-issuing banks ship EMV plastic due to the new liability rules, the majority of customers nationwide carry chip cards in their wallets.
As a brick-and-mortar merchant, you need a credit card machine that can correctly read EMV chip technology. However, this doesn’t mean investing in multiple terminals:
Even better, you don’t need to invest in a dedicated POS terminal to start accepting EMV payments. Clover Go, for example, allows merchants to turn their existing smartphones and tablets into portable credit card readers that can securely process payments made via contactless or EMV chip technology.
If you’re an eCommerce merchant, you can continue using your current payment gateway with no additional changes to your checkout flow. This is because there is no distinction between legacy plastic and EMV credit cards when shopping online. In both cases, customers initiate card-not-present (CNP) transactions that don’t require magnetic stripes or embedded security chips.
To ensure all of your online sales benefit from the ultimate in fraud protection, implement best practices to secure your eCommerce website.
EMV chip technology is more secure than magstripe plastic. Still, making the shift to EMV payments proved to be very expensive for small businesses that couldn’t afford the necessary hardware upgrades to their POS systems.
In an effort to facilitate EMV technology adoption, fraud liability rules were altered in 2015 by U.S. credit card issuers:
After October 1, 2015, liability for in-store counterfeit fraud shifted to whichever side of a transaction wasn’t EMV-ready – either the merchant or the card-issuing bank. As such, non-compliance with EMV chip technology became more expensive than upgrading one’s payment environment. Adoption of the more secure standard began to go mainstream in the U.S.
Since these liability rules went into effect, in-store payment fraud has dropped significantly. U.S. merchants that made the switch saw counterfeit fraud plummet 87 percent between September 2015 and March 2019.3
EMV chip technology has proven so effective at combatting in-store fraud that, starting in April 2018, Visa, Mastercard, American Express, and Discover decided they would no longer require signatures to verify card-based purchases.4
Retailers can still optionally require signatures to verify a cardholder’s identity, but this is at their discretion. Dropping the signature requirement will ultimately help streamline the checkout process without compromising credit card security.
The most popular type of EMV technology comes in the form of a physical credit card that users must dip into a chip-enabled terminal. This payment option comes in other varieties as well, including:
More than 3.7 million merchants now accept EMV chip technology.2 That number will only continue to increase as more businesses:
Merchants that don’t make the switch, however, will become easier targets for criminals. Because thieves tend to go after the lowest-hanging fruit, they will increasingly focus their attention on those businesses that continue to only accept magstripes.
The gasoline station industry has been slow to adopt the EMV technology standard – primarily because of cost.
According to industry experts, it will cost gas stations an estimated $6 billion to replace card readers. These upgrades often require that gas stations replace their pumps, hardware, and software to make the transition complete.5
Visa and Mastercard are requiring gas stations make the switch from magnetic stripe card readers to EMV readers at pumps by April 17, 2021.6 Gas station operators that don't meet the deadline may incur penalties, with liability for fraudulent charges transferring from financial institutions to station owners.
The fraud prevention movement should continue paying close attention to the growing pains that gas stations currently experience as they make the transition to EMV technology.
The need for EMV credit card processing all comes down to a few key points:
Although making the switch to EMV chip technology isn’t free, the above benefits more than pay for themselves.
In one word: absolutely.
Just as EMV chip technology protects financial institutions and merchants, it also protects consumers. When a customer uses an EMV-enabled card or device at checkout, it never leaves his or her hand. This alone helps to reduce potential “in-house” fraud committed by an employee.
The unique transaction code that EMV cards create also provides peace of mind to users. They know they’re better protected from fraud and abuse when making in-store purchases using EMV chip technology.
First Data is all about technology, collaboration, and customer service. We stand ready to handle the payment needs of all businesses, whether it’s to:
Below represents just some of the EMV-enabled equipment options that mesh seamlessly with our PCI-compliant processing solutions.
Clover Go is perfect for anywhere your business goes. No matter where your business takes you, your customers are free to pay however they choose, whether it’s via:
The Clover Station Solo is a POS system that allows business owners to run their entire business all from one convenient device.
Just like the Clover Go, the Clover Station Solo is EMV-enabled and can also accept standard credit cards, debit cards, and contactless payment solutions.
If barcode scanners or other peripherals are needed to run your business, that’s no problem. You can easily add them to your Clover Station Solo.
The payments landscape is evolving rapidly, with many banks, merchants, and consumers understandably concerned about fraud.
Although there is no single solution that can completely protect against payment abuse, EMV chip technology is one of the most effective ways to help prevent in-person fraud.
Get information on how you can set up an EMV account with First Data, whether you run a:
EMV is a registered trademark in the U.S. and other countries and an unregistered trademark elsewhere. The EMV trademark is owned by EMVCo, LLC.